Winton Tractor Hedge Cutter
Winton tractor hedge cutters are PTO flail attachments for maintaining hedges, ditches, and embankments. They efficiently trim large areas of overgrown vegetation, including brambles and small trees.
Winton Tractor Hedge Cutter Range
The range encompasses three models with cutting widths ranging from 0.6M to 1M, and suitable for tractors ranging from 20HP up to 55HP.
WAM60 Hedge Cutter Model
This model has a 230cm reach with flail blades operating sideways and with an up-down action. This makes it exceptionally well-suited for use on roadsides and country lanes, facilitating the trimming of hedgerows, cutting tree branches, and managing tricky verges. An adjustable rear roller and user-friendly levers control the cutter’s height and reach, ensuring a professional result.
To view the other two models available, please see the bottom of this page under the Models section.
Contact Us
If you’re considering purchasing a hedge cutter, explore our full range of tractor hedge cutters here. For more information, call us at 0333 880 6654 or fill out the Contact form.
WAM60
Cutting width of 0.6M
Tractors with 20 to 35Hp (horsepower) are suitable.
WAM80
The cutting width is 0.8M.
Ideally suited for 25 to 40HP (horsepower) tractors.
WAM100
1.0M cutting width.
Suitable for 35 to 55HP (horsepower) tractors.
Features and Benefits
- Adjustable roller.
- "Y" flail cutter blades.
- Hedge cutting height = 2.3M (Horizontal cut height).
- CAT-1 linkage.
- PTO driven "hydraulic" pump set up.
- PTO shaft supplied.
- Speed of PTO = 540 rpm.
- Easy to operate lever controls.
- Reversible flail direction.
- Use 80w90 Gear Oil
WAM60 Model
- Weight 250kg.
- Tractor power 20-35Hp.
- Working width 60cm.
- Y Flail Cutter Blades = 22.
WAM80 Model
- Weight 275kg.
- Tractor power 25-40Hp.
- Working width 80cm.
- Y Flail Cutter Blades = 32.
WAM100 Model
- Weight 275kg.
- Tractor power 35-55Hp.
- Working width 100cm.
- Y Flail Cutter Blades = 40.
Unfortunately, no it won`t. The minimum horsepower required is 20HP. However, we do offer a tractor hedge cutter from Wessex that has a sickle cutter bar that would suit your compact tractor. It actually can work with, as little as a 15HP tractor, therefore the extra 3 HP would enhance its performance.
The WAM100 (1M cut model) can reach a horizontal height of 1.95M.
NB: This dimension was taken when used with a 2018 Solis 26 compact tractor fitted with industrial tyres, therefore please note this may change slightly depending on the model of tractor and tyre configuration fitted.
Yes, they can. Please check the specification for full details/dimensions.
